A Step-by-Step Guide to Changing Your LG Refrigerator’s Parts

Step 1: Determine the Type of Filter

The first step in changing your LG refrigerator’s filter is to determine the type of filter your refrigerator uses. LG refrigerators typically use either a LT700P or LT800P filter. You can find this information in your refrigerator’s owner’s manual or by checking the model number of your refrigerator online.

Step 2: Locate the Filter

Once you have determined the type of filter your LG refrigerator uses, the next step is to locate the filter. The filter is typically located at the back of the refrigerator, behind the bottom shelf. You may need to remove the shelf to access the filter.

Step 3: Remove the Old Filter

Once you have located the filter, the next step is to remove the old filter. To do this, turn the filter counterclockwise until it comes loose. Then, gently pull the filter out of the refrigerator.

Step 4: Insert the New Filter

After removing the old filter, the next step is to insert the new filter. Make sure the new filter is facing the correct direction and then insert it into the filter housing. Turn the filter clockwise until it is securely in place.

Step 5: Reset the Filter Indicator

Many LG refrigerators have a filter indicator that lets you know when it’s time to change the filter. After changing the filter, it’s important to reset the indicator. To do this, hold down the filter button for three seconds or consult your owner’s manual for specific instructions

Step 6: Clean the Refrigerator Coils

In addition to changing the filter, it’s important to clean the refrigerator coils. Over time, dust and debris can accumulate on the coils, which can cause the refrigerator to work harder and use more energy. To clean the coils, first unplug the refrigerator. Then, use a vacuum or a coil brush to remove any dust or debris. Finally, plug the refrigerator back in.

Step 7: Check the Door Seals

Another important component of refrigerator maintenance is checking the door seals. Over time, the door seals can become worn or damaged, which can allow cool air to escape and warm air to enter. To check the door seals, close the refrigerator door on a piece of paper. If the paper slips out easily, it may be time to replace the door seals.

Step 8: Replace the Water Filter Housing

In some cases, you may need to replace the water filter housing in addition to the filter. This may be necessary if the housing is damaged or leaking. To replace the housing, first turn off the water supply to the refrigerator. Then, remove the old housing and install the new one. Finally, turn the water supply back on and check for any leaks.

In conclusion, regular maintenance is crucial for keeping your LG refrigerator running smoothly and efficiently. Changing the water filter, cleaning the coils, and checking the door seals are all important components of this maintenance. With these simple steps, you can keep your LG refrigerator working like new for years to come.